Neueste Zuken-Blog-Posts
Willkommen im neuen Zuhause für den Zuken-Blog. Bleiben Sie auf dem Laufenden mit den neuesten Nachrichten, Blogs, Entwicklungen von Zuken und Branchenexperten.
Menu
Abonnieren Sie den Zuken-Blog und erhalten Sie die neuesten Informationen gleich nach ihrer Veröffentlichung direkt in Ihrem Posteingang. Behandelte Themen: PCB Design, Electrical / Fluid Design, Digital Enterprise and People & Markets
Sie können sich von der zentralen Abmeldeseite jederzeit von jedem Blog-Feed oder von Marketing-E-Mails von Zuken abmelden.
Alle Beiträge in chronologischer Reihenfolge
- Blog
Dezember 06, 2018
Modular Board Design: A Platform Approach to Increase Product Variants and Decrease Components
It sounds like a paradox: electronics manufacturers can increase variation within a product line while using fewer electronic components. Reuse keeps product costs low, increases product flexibility and customization. Far from paradoxical, the approach is quite doable today through a process called modular board design coupled with predictive analysis numbers returned by the Internet of Things.
Read now
Modular board design coupled with predictive analysis results gathered from the Internet of Things keeps product costs low and increases flexibili...
- Blog
Dezember 04, 2018
Tech Tip: How to Import DXF Data into CR-8000 Design Gateway Symbol Editor
Follow along with this step-by-step video and learn how to import DXF data into the CR-8000 Design Gateway symbol editor.
Read now
Tech Tip: follow along step and step with the video to learn how to import DXF data into CR-8000 Design Gateway Symbol Editor
- Blog
November 29, 2018
Additive Manufacturing Helps Build Lower Cost Replacement Parts and Tools
It has often been noted that many of the aircraft and other weapons systems used by the armed forces are older than the service men and women operating and maintaining them. While the average age of a U.S. domestic commercial airliner is 11 years, it is not uncommon for aircraft to still be in service at 30 years. Likewise, there are many machines and systems in electric power generation, discrete parts manufacturing, chemical process, oil and gas production and many other industries that have been in continuous operation for several decades or longer.
Read now
Additive manufacturing technology helps save significant time and cost in the maintenance and repair of machinery and systems across industries. ...
- Blog
November 27, 2018
Tech Tip: Variation Management in Component Lists
Variation Management provides the means for the user to define the part numbers and mounting status of parts to be mounted based on the product variation: delivery destination and model. Furthermore, Variant Management applications allow the user to easily switch views and export parts lists based on the destination.
Read now
Variation Management provides the means for the user to define the part numbers and mounting status of parts to be mounted based on the product va...
- Blog
November 22, 2018
Meet Our People: Geo, E3.series Application Engineer in San Francisco, USA
Geo (short for Geoffrey) Ng joined Zuken in 2017 and enjoys the responsibilities and flexibility of his job, the travel opportunities and the “can-do” attitude of the company. He is based in the bay area of San Francisco, California, USA.
Read now
Geo (short for Geoffrey) Ng joined Zuken in 2017 and enjoys the responsibilities and flexibility of his job, the travel opportunities and the “c...
- Blog
November 20, 2018
Tech Tip: How to Find a One Pin Net in CR-8000 Design Force
Learn how to find a one pin net using a batch program and then output the one pin net information in the netlist text file.
Read now
This Tech Tip shows users how to find a one pin net using a batch program called DFbdnetout.exe and then output the one pin net information in the...
- Blog
November 13, 2018
Tech Tip: Creating Automatic Bill of Materials and Wire/Connector List Reports in E3.series
This tech tip explains how to create automatic bill of materials (BOM) and connection or wire list reports. E3.series has the built-in capability to generate these reports, and users can choose to either create standalone reports in Excel format for use with other applications or build the reports into their current E3.series projects as additional sheets.
Read now
This tech tip explains how to create automatic bill of materials (BOM) and connection or wire list reports. E3.series has the built-in capability ...
- Blog
November 06, 2018
Tech Tip: E3.series 2018 Place Table Symbol Enhancements
In E3.series 2018, table symbols are now supported for all devices on formboards. Now when you select any device on the formboard, you’ll find the command Place Table Symbol is now in the context menu.
Read now
In E3.series 2018, table symbols are now supported for all devices on formboards. Now when you select any device on the formboard, you'll find the...
- Blog
Oktober 31, 2018
Tricks and Treats with E3.series
Learn design tricks and treats with E3.series. Levels help you manage your design easily and the connector attribute configurator provides granular control at your fingertips.
Read now
Learn design tricks and treats with E3.series. Levels help you manage your design easily and the connector attribute configurator provides granula...
- Blog
Oktober 30, 2018
Tech Tip: E3.series 2018 Area Selection Enhancements
E3.series 2018 now provides a way to control which objects are highlighted when an area selection is done.
Read now
E3.series 2018 now provides a way to control which objects are highlighted when an area selection is done. In previous versions when you did a sel...
- Blog
Oktober 25, 2018
Bridging the Gap between the Maker Movement and Mass Production Technology with IoT and the Trillion-Node Engine
Japan is one of the first countries to face the combination of challenges such as energy issues, population decline and an aging society. Solving these problems with the benefit of the Internet of Things (IoT) could generate future business opportunities as well as meeting the demands of society. Enabling as many people as possible to try out new ideas, and encouraging them to develop diverse products, will broaden these opportunities. The Trillion-Node Engine is a platform for realizing this objective.
Read now
- Blog
Oktober 23, 2018
Tech Tip: E3.series 2018 Creation of Line and Application Fonts
One of the new features in E3.series 2018 is the ability for users to create their own line and application fonts. The advantage to this is now users can create completed graphics such as spiral tape and corrugated tubing, which will follow the curvature of a segment on a formboard. These line fonts can be defined for any graphic entity in E3.series.
Read now
One of the new features in E3.series 2018 is the ability for users to create their own line and application fonts. The advantage to this is now us...
- Blog
Oktober 16, 2018
Tech Tip: CR-8000 Board List Processor
Custom attribute lists for design and panel data can be configured and saved using CR-8000’s Board List Processor.
Read now
Custom attribute lists for design and panel data can be configured and saved using CR-8000 Board List Processor. Each list type includes many att...
- Blog
Oktober 11, 2018
Meet Our People: Tom, Chief Software Engineer in Bristol, UK
Tom Lucas joined Zuken in 1997 and has been challenged in a variety of roles and rewarded with promotion opportunity. Today he is part of a small but mighty team of three specializing in PCB routing research, and is based in the Zuken Technology Centre in Bristol, UK.
Read now
- Blog
Oktober 09, 2018
Tech Tip: How to Auto Rename Wires in an E3.series Project
The video below explains the different methods of renaming your wires in an E3.series, either while adding them or after they’ve been added to your project. It includes setup instructions for each method.
Read now
This tech tip explains the different methods of renaming your wires in an E3.series, either while adding them or after they've been added to your ...
- Blog
Oktober 05, 2018
Connect Your Component Library to the Supply Chain
Take a walk in the engineer’s shoes: I need an 80 MHZ network controller for my new project and I found one in the PLM/PDM system. That was easy. Now a quick check in the procurement database to do a price and availability check. So far so good, now on to the component engineering system to see if there are any possible lifecycle issues with a 10-year minimum requirement. It’s my lucky day, no issues and it’s a company-preferred part with an ECAD library instance.
Read now
Design engineers must have the ability to make intelligent component selections involving critical supply chain information without having to leav...