Electrical
Menu
- Blog
October 16, 2024
Wireless Power Transfer
Wireless Power Transfer (WPT) is replacing cables and wires in consumer electronics, electric vehicles (EVs), and healthcare. Zuken offers a suite of solutions that help engineers design, simulate, and validate WPT systems. Learn more.
Read now
- Blog
July 17, 2023
Early Optimization for Wire Harness Designs
Early optimization of wire harnesses helps minimize design flaws, reduces costs, and saves valuable time during the product development cycle.
Read now
- Blog
April 17, 2023
The Dream of a Race Car
M-H eningeering combines their passion for motorsports and electrical engineering with the purchase of a 2017 KTM X-Bow promo car. To improve its track performance, they developed an add-on four wheel traction control.
Read now
- Blog
March 21, 2023
How to avoid errors with uncontrolled electrical design changes
System design engineers must balance the demands of time and cost efficiency as well as accuracy under tight deadlines. When projects require collaboration between distributed people and teams, communication issues can make collaboration a challenging issue.
Read now
- Blog
March 14, 2023
Harness Design: How to connect MCAD and ECAD design tools into a consistent design flow
With E3.3DRoutingBridge and E3.3DTransformer Zuken provides a complete set of solutions for seamless data exchange for 3D harness routing designs bridging the gap between the MCAD & ECAD worlds.
Read now
- Blog
May 16, 2022
ECAD Data Migration vs. Data Conversion
Electrical and electronic design data represent a valuable investment, which should be used and reused as much as possible. In order to preserve the investment into existing design data throughout the product lifecycle, there will always be a requirement to process the original design data using a more modern and powerful ECAD tool. Learn more about the difference between data migration and data conversion, and find out what the right fit for your organization is.
Read now
- Blog
February 22, 2022
Are we facing a shortage of qualified staff in control cabinet building?
Companies are to expect an acute shortage of qualified workers in the coming years. We will show levers for optimizing workflows and tools in production so that you can adapt your processes to meet the challenges of the lack of specialists in control cabinet building.
Read now
- Blog
October 04, 2021
INORCOAT: Making environmentally friendly coating technology affordable
INORCOAT relies on E3.series for the development of environmentally friendly nanotechnology coating systems. The first system was recently put into operation at the Portuguese National Bank for the coating of dies for euro coins.
Read now
- Blog
September 13, 2021
What’s New in E3.series 2021, Part 2
This two-part post explores the top features of E3.series 2021. The new release’s fundamental goal is to create an ecosystem to foster multi-disciplinary cooperation and enable a digital engineering workflow. I’ll pick up where I left off in Part 1...
Read now
- Blog
April 22, 2021
Benefits of Connecting Functional Design to Detailed Design
E3.topology builds an intelligent connection between functional design and detailed design to create a transformative design process. Learn more about the benefits of connecting functional and detailed design in one package.
Read now
- Blog
August 06, 2020
What's New in E3.series 2020: Part 2
The best and the most exciting part of what’s new in E3.series 2020 is hands-down the sheer breadth of topics. E3.series 2020 is the best release yet!
Read now
- Blog
July 22, 2020
What’s New in E3.series 2020: Part 1
The E3.series 2020 release is full of exciting new features and improvements. Notably, more than 25 major enhancements covering a wide variety of topics make this the best release yet! The new features in E3.series 2020 cover a wide range of topics.
Read now
- Blog
July 21, 2020
How to Configure and Use E3.WiringCockpit
E3.WiringCockpit is a great Cabinet Production tool to use alongside with E3.series. Making it easier to connect between engineering and manufacturing...
Read now
- Blog
July 02, 2020
Harness Builder 2020 for E3.series – What’s New Part 2
We are closer than ever to a perfect design-to-manufacturing solution for simple and complex harnesses alike. In fact, the Harness Builder 2020 for E3.series release has more than 15 significant enhancements.
Read now
- Blog
June 30, 2020
Paperless Engineering with E3.WiringChecks and E3.WiringCockpit
Communication between disciplines is increasingly critical as complex designs require more and more collaboration. Communication gaps often riddle engineering companies. E3.WiringChecks and E3.WiringCockpit is here to facilitate communication between design, checking, commissioning, technicians, and all parties involved after the initial design.
Read now
- Blog
June 19, 2020
Harness Builder 2020 for E3.series – What’s New Part 1
The 2020 release of Harness Builder for E3.series is more than exciting, it is outright amazing. There are more than 15 major updates all across the toolset. New features include automation, reporting, and documentation options. Furthermore, the new downstream manufacturing, testing, and visualization connections are groundbreaking. I will cover our favorite 2020 updates in this two-part blog series.
Read now